| |
Description: | PROUDLY PRESENTS
SoniqWare.PE-1.Linear.Phase.Parametric.Equalizer.VST.v1.1
SUPPLIER ..: TEAM AiR
PROTECTION : SERIAL
SIZE ......: 01 4,77MB
DATE ......: 03/2009
SoniqWare releases PE-1, a seven bands stereo linear
phase parametric equalizer with analog-like fully de
-cramped frequency response, graphical editor, and
exclusive shape controls.
PE-1 is a 7 bands fully parametric stereo equalizer
which, besides sonic quality, possesses several
unique and valuable features. First, it implements
linear phase filters which totally preserve signal
details and clarity, especially during transients, by
avoiding the smearing usually caused by conventional
non-linear phase filters. Of course, the filters in
PE-1 can be selected amongst the usual shapes,
including bell peaking , band-pass, notch,
resonant low-shelf, resonant high-shelf, low-cut
and high-cut with different attenuation slopes, for a
total of 11 filter shapes. The different bands also
have unique filter shape controls allowing to tune
the shape of the amplitude response of the bell
filters, from usual bells to plateaus, exhibiting
totally different sonic qualities and feel. This is
performed individually for each equalizer band and
really brings unprecedented control over the
frequency response and tonal shaping of your
material. Last but not least, the frequency responses
are totally de-cramped, meaning that the response is
not squeezed down in the HF region as it is the case
on most digital equalizer implementations. This
property actually simulates the behavior of
professional analogue audio equalizers and results in
greater sonic clarity. In the same vein, several
modes are available for the Q factor dependency with
filter gains, some of which mimic the feel of
analogue equipment. Another smart feature, the user
has access to an auto-gain function, where the master
gain is adjusted according to the equalizer settings,
in order to preserve the same perceived volume and
minimize clipping. Further participating to the
usability, the frequency response of the filters can
be edited graphically using convenient handles on a
large display. Finally, the interface also allows to
use host automation features, as well as to store and
retrieve programs. PE-1 handles all professional
sample rates, up to 192 kHz.
Features
7 bands parametric equalizer
linear phase filters
de-cramped HF response
7 filter types: bell, low-shelf, high-shelf, low
-pass, high-pass, band-pass and notch
unique filter shape control for further tonal shaping
resonant shelf filters with adjustable
overshoot/undershoot
low-pass and high-pass filter slopes: 12, 24 and 48
dB/oct
filter parameters: center frequency, gain, Q
filter center frequency control range: 20 to 20000
kHz
filter gain control range: -24 to 24 dB
accurate frequency control 1 Hz increments below
100Hz
4 modes for Q factor behavior
auto-gain function
graphical edition of response using colored handles
L/R vu-meter with hold peak and clip readouts
supported sample rates: 44.1, 48, 88.2, 96, 176.4
192 kHz
low noise, SNR: 133dB
stereo operation
master gain
load/save programs and banks
VST automation of all parameters
silent controls
sub-pixel knob rendering
http://www.soniqware.com
Installation Notes :
--------------------
1 Unzip, Unrar and copy files into VSTPlugins dir
2 Enjoy this fine Team AiR release
nFO lAYOUT c 2006 bEARCAVE-dESIGN
|